Fitter
- Reports directly to the Production Manager. Once assigned reports directly to the project Foreman in the performance of his/her responsibilities.
- Strictly adheres to corporate, federal, state and local safety regulations prior to setting up or operating any machinery.
- Insures that all Epsilon Systems Mission Readiness Group Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.
- Strictly adheres to safety, quality standards.
- Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.
- Insures all tools listed on the "Required Tools List" are available for use within two weeks of your employment.
- Insures that all requirements of the Epsilon Systems Mission Readiness Group Quality Assurance Manual are followed when invoked by QA Workbook, Work Package (WP), Work Instructions (WI) and/or other guidance given by management.
- Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).
- Follows detailed repair procedures and instructions (e.g.; QA Workbooks, Work packages steps, RECs, CWPs, FWPs, TGIs etc.) required to complete the production operations.
- Performs as Team Member, cooperating with the efforts of other trades during an installation, modification or repair operations.
- Performs component and/or system troubleshooting to diagnose the problem and provide most cost effective recommendation for completing repairs.
- Performs and/or verifies mechanical alignments.
- Insures control and assumes responsibility for Level-1 material controls in accordance with Epsilon Systems Mission Readiness Group Instructions.
- Performs installation, repair, overhaul or modification in place or in shop to mechanical systems and components (e.g.; Valves, Actuators, Cylinders, Accumulators, Pumps, Launchers etc.).
- Assists with the performance of on-site field service for system grooms and checkouts, minor repairs and system configuration validation.
- Prepares and installs equipment or system alterations (e.g.; TEMPALTs, SHIPALTs, ORDALTs, etc.) IAW the directives (i.e.; instructions, drawings, MILSPECs, etc.).
- Assists in rigging when necessary.
- Other duties as assigned.
- High school diploma/equivalent/Apprenticeship Diploma/additional vocational courses or technical school graduate; and/or military and/or civilian experience with marine mechanical systems in a repair department or shipyard
- 5 years' experience.
- Has knowledge of the trade qualifications and performs as a level III Outside Machinist.
- Must be able to understand and perform the basic set up, alignment, and operation of various portable tools and hand tools used in the trade.
- Has working knowledge of shipboard mechanical systems (repair/installation practices, procedures, alignments and troubleshooting).
- Must have the ability to read, understand, interpret and work from blueprints, sketches and specifications.
- Must have experience in the disassembly, repair, installation, testing and inspection of ship machinery such as, but not limited to, propelling machinery, pumps, valves, launchers, discharge machinery, ventilation equipment, steering gear, evaporators, heaters, condensers, propulsion plants, torpedo tubes, shutter doors, antennae mast mechanical groups.
- Ability to use such precision measuring instruments as height gauges, depth gauges, calipers, verniers, lay-out tools, tachometers, thermometers, vibration indicators
- Possesses the ability to accurately record readings and measurements as well as complete documentation, repair, and testing of equipment.
- Must have knowledge of rigging equipment and be able to identify damaged and/or worn equipment. Must be able to lead rigging teams in medium to larger rigging tasks.
- Assists in rigging evolutions when necessary.
- Communicates effectively
- Works independently or in a group. Requires no supervision/oversight.
- Ability to do basic math, i.e. add, subtract, divide and multiply.
- Ability to read, write, speak, and comprehend English.
- Ability to obtain and maintain National Security Clearance Level Secret.
- Ability to obtain and maintain base access to assigned government/military/private installations.
- Ability to travel.
- Current security clearance
- Requires walking, reaching, sitting and concentration in the presence of occasional noise.
- Able to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships).
- Able to lift, carry and move objects up to 50 lbs in weight.
- Must have manual and finger dexterity; able to grasp, manipulate, assemble small objects.
- Able to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.
- Able to perceive and distinguish normal range of colors.
- May be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots.
Recommended Jobs
Summer Trip Leader
The Basics: Our Summer Trip Leaders will: work with a Co-Leader and an Assistant Trip Leader to provide an enriching experience that includes activities such as backpacking, paddling, rock-climbi…
Dentist Office Receptionist
We are seeking a Front Desk Receptionist with at least 1 year dental experience and Open Dental knowledge to join our team. Requirements: Accountable for completing assigned responsibilities …
Agile Project Manager
Agile Project Manager Position Description CGI has an immediate need for an Agile Project Manager with SDET to join our team. This is an exciting opportunity to work in a fast-paced team environ…
Payroll and Human Resources Assistant
We are looking to add a staff-level Payroll and Human Resources professional who will play a key role on the team. The ideal candidate will ensure timely and accurate payroll processing, assist with …
Director- Emerging Alliances
Director- Emerging Alliances Position Description CGI has a global Emerging Alliance Program to identify, assess, nurture, develop and support new partnerships that can provide growth for CGI in…
RN Med Surg/Tele - Perm Placement
Cooperidge Consulting Firm is seeking a Registered Nurse (RN) – Med Surg/Telemetry (Nights) for a leading Level II Trauma Center in Winchester, VA . This position offers the opportunity to prov…
Travel Nurse - Endoscopy Job in Richmond, VA - $9,893 per Month (2 Years Experience Needed)
Vetted is seeking a RN - Endoscopy for a travel job in Richmond, Virginia . Must have 2+ years of experience. This contract pays approximately $9,893/month gross. Assignment details: C…
Government and Public Sector - Assurance - Tech Risk - Staff - TS SCI Clearance
At EY, we’re all in to shape your future with confidence. We’ll help you succeed in a globally connected powerhouse of diverse teams and take your career wherever you want it to go. Join EY and…
CDL A Dry Van OTR Drivers
Now Hiring – CDL A Dry Van OTR Drivers: Denver Cargo Inc. is looking for professional CDL A OTR Dry Van drivers. We offer steady miles, reliable freight, and a dispatch team that actually supports y…
ServiceNow SPM Developer(s)
At Credence, we support our clients’ mission-critical needs, powered by technology. We provide cutting-edge solutions, including AI/ML, enterprise modernization, and advanced intelligence capabilities…